SOOCOO S200 Marco Polo Firmware Update Operating Instructions
Note: Make sure the camera is connected to a power source or has more than 60% batter.
1. Download the firmware to the SD card root directory(The file name is “FWHT338M.bin"), then put the SD card into the device.
2. Turn on the camera, the system program will update automatically, about 1-3 minute, update successful the camera automatically turn on.
2. After updating, the camera will turn on automatically, it means that the updating had finished, then take out the TF card and delete the file
'FWHT338M.bin', or format the TF Card in the camera. (If the firmware file not delete, when you turn on the camera,the system program will update automatically again. )
3.Update finished, the Version is: 2017****. PS: 2017**** is the firmware no.
---*** If you have any questions, please email us. ***---
Thank you!
Michael
Contact Us: service@soocoo.cc
Official Website: http://www.soocooplus.com
SOOCOO S200 Marco Polo Camera Firmware Update Print
Created by: Michael Johnson
Modified on: Tue, 5 Dec, 2017 at 9:09 PM
Did you find it helpful? Yes No
Send feedbackSorry we couldn't be helpful. Help us improve this article with your feedback.